![]() Or is there a simple way I can't picture yet ?Ĭlick to expand.Here is the simple way with no fancy electronics required.ġ. It'll be hard to do it for the average Joe like me. ![]() Or by using a larger ROM, how to address it ? It'll require some logic and a daughter board as said by I guess. For the boot ROM, the jumper on the board works to select the bank right ? In the first position it'll read the ROM from 0000-0000 to 0007-FFF0, in the other position it'll read from 0008-0000 to the end ? So, by concatenating the 2 U98 roms (anyide KI 1.5d + patched anyide KI2 conv.) and programming it to the 27C080 it should be good right ?Īssuming I'm right, we could concatenate and burn all the sound roms to 27C080, but the how to select the proper bank ? So yeah, with an IDE to SD and switchable multi SD adapter it's easy to picture how to switch from one HD to the other.Ībout the ROM part, it's more foggy. ![]() The hardware mod was in reaction to your picture outlining the eprom jumpers. Your board can only run KI2 though (there's no KI ROM to run on dedicated KI2 hardware).Ĭlick to expand.I see, I read again you post and saw almost all the answers. So that's correct, this ROM won't work with your board, but you also don't need the conversion PCB (it'll work if you plug your drive directly into the PCB). yours should require the "Killer Instinct 2 (Dedicated) U98 Any-IDE Boot ROM L1.4".īTW, I just re-tested, and it boots fine for me on my KI PCB.Įdit: I just looked more closely at the pic you posted - your "working" ROM says KI2 ANY-IDE DEDICATED BOOT ROM. You should confirm that your test switch isn't thrown as well, since that would do the same thing ("DISK TEST SKIPPED"), except you'd be able to run the diagnostic tests.ĭid you try burning the "Killer Instinct 2 (Conversion) U98 Any-IDE Boot ROM L1.4" ROM without my patch? That shouldn't work with the conversion PCBs either on that board though. This only works on dedicated KI PCBs, because the dedicated KI2 PCBs remapped several addresses (and running the wrong one does exactly what you're seeing, going into test mode and locking up).
0 Comments
Leave a Reply. |